To Next PageTo Next Page
Need help?Do you have a question about the GRAPHTEC CC300-20 Craft ROBO and is the answer not in the manual?
General| Type | Desktop |
|---|---|
| Interface | USB |
| Software Compatibility | ROBO Master |
| Resolution | 0.025 mm |
| Supported OS | Windows |
| Model | CC300-20 Craft ROBO |
Safety warnings and precautions for using the equipment.
FCC compliance statement regarding radio frequency interference.
Information regarding the manual's copyright, specifications, and contact details.
List of registered trademarks and company names.
Copyright notice for the user's manual.
Verify that all included components are present with the product.
Overview of the main unit's components and their functions.
Step-by-step guide to connect the AC adapter and power on the device.
Instructions for connecting the Craft ROBO to a computer via USB.
Procedure for loading various media types with a carrier sheet.
Method for loading media directly without a carrier sheet.
Guide to adjusting blade depth and mounting the blade plunger.
Instructions for attaching a ballpoint pen for plotting.
Troubleshooting common issues and their solutions.
Specifies the necessary system environment to use the controller software.
Step-by-step guide for installing the controller software and drivers.
Methods to launch the Craft ROBO Controller application.
Describes the main functions and operational procedures of the controller.
Details on configuring media types, speed, thickness, and other parameters.
Lists common error messages and provides troubleshooting steps.
Overview of cutting data directly from an SD card.
Procedures for cutting designs using data stored on an SD card.
Troubleshooting common errors related to SD card operations.
