Need help?Do you have a question about the GRAPHTEC CE LITE-50 and is the answer not in the manual?
Details regarding the manual's content, disclaimers, and copyright information.
Safety guidelines for handling the cutter blade and precautions after turning the device on.
Guidelines for preparing for work and precautions when using curled media.
Lists and describes the included accessories with the cutting plotter.
Identifies and explains the function of each part of the cutting plotter.
Details the screens, buttons, and display elements of the operation panel.
Instructions for installing the main unit and connecting it to power and a computer.
Information on compatible media sizes and the resulting cutting area.
Steps for installing the necessary drivers and software for the plotter.
Configuration steps for language and unit selection upon initial device startup.
Guide on adjusting the blade depth and properly setting the cutting tool.
Instructions for positioning the media set levers based on media width.
Procedure for adjusting the push rollers for correct media positioning.
Step-by-step guide for loading sheet media onto the plotter.
Instructions on how to unload media from the device.
How to select and confirm the registered cutting condition number.
Precautions for creating cutting data, including origin position and area settings.
Information on how to send cutting data from a computer to the plotter.
Guidelines for regular maintenance and cleaning of the device and cutter pen.
Explains the concept and methods of printing and cutting data.
Guides on performing simple cuts and adjusting offset/distance volumes.
Details on cutting based on scanned registration marks.
Describes different types of registration marks and their arrangement.
Workflow for creating registration marks using Graphtec Pro Studio software.
Steps for cutting printed media using various software applications.
Instructions and procedures for loading and cutting roll media.
Methods for loading and scanning roll media using different positions.
Guide on using carrier sheets for cutting and related precautions.
Instructions for using the drawing pen for plotting operations.
Procedure for cutting data stored on a USB memory device.
How to cut data associated with barcodes for automated job selection.
Using the copy function to cut multiple instances of the same design.
How to stop or pause a cutting operation in progress.
How to individually register and set cutting conditions for different media.
Settings to optimize cutting quality by adjusting tool and offset values.
Adjusting cutting force, offset force, and condition priority.
Fine-tuning cutting time, speed, acceleration, and tool up speed.
Settings for cutting thick media, including tangential mode and overcuts.
Procedures for performing cut tests and optimizing results like offset value.
Configuring scan modes, confirming registration, and correcting mark positions.
Configuring the device to detect media width automatically.
Configuring commands, HP-GL, and GP-GL settings.
Customizing language, unit of length, and beep settings for the operation panel.
Troubleshooting common issues like device non-operation or irregular media movement.
Lists and explains various error codes for GP-GL, HP-GL, ARMS, and other displays.
Procedures for plotting test patterns and confirming main unit operation.
Steps for adjusting the width detection sensor and performing main unit diagnosis tests.
How to check the current firmware version of the device.
Detailed technical specifications of the CE LITE-50 cutting plotter.
Lists the product names and model numbers of included supply items.
Diagrams illustrating the physical appearance and dimensions of the device.
Visual representation of the device's menu structure for navigation.
Default settings for various menu items on the HOME and MENU screens.
To Next Page
General