(5) After checking that the USB memory access display turns green, press the ENTER key.
Refer to page 3-3 for details on USB memory access.
“_CHG” and a number will be appended to the file name each time you exchange a USB memory device.
Example: When data is captured to the file “TEST.GBD”:
First USB memory device : TEST.GBD
Second USB memory device : TEST_CHG1.GBD
Third USB memory device : TEST_CHG2.GBD
* While ring capture is On, the USB memory device cannot be exchanged.
The exchange procedure must be completed within five minutes. Data will be lost after five minutes have
elapsed.
(6)-4 Specify Save Destination (Screen Copy)
Saves data being replayed as an image file to the internal memory or USB memory.
<If the naming method is Auto> <If the naming method is Arbitrary>
Setting Description
(1) Folder Specify a folder to which you want to save data. Refer to page 3-41, "File box" for details.
(2) File Specify a file to which you want to save data. Refer to page 3-41, "File box" for details.
(3) Name Type Set how a data file should be named.
Auto : Automatically supplies the file name.
Example: 20050101-123456_UG.BMP
Number part : File creation date
* The file is created on January 1, 2005, 12:34:56 in this
example.
UG : User number of the user capturing data
UG: Guest
U1: User 1
U2: User 2
BMP : Data format
BMP: Bitmap file format
PNG: Ping format
Arbitrary : Data is captured to a file with an entered file name.
Sequentialnumber
:
A file is created with an arbitrary file name that has been entered, followed by
asequentialnumber.
(4) File Type Sets the file format used to save data.
BMP: Saves data in bitmap file format
PNG: Saves data in ping format
(6)-5 Execute (Screen Copy)
Executes screen copy and saves it to an image file. * Refer to page (6)-4 "Specify Save Destination" for
details on specifying the save destination.
To Next Page
Loading...
