3. Data record : How to Record
Once requied settings are stored,user can initiate the data recording while it is
recording. Recorded data is available for replay.
1. Start recording
(1) Push the [START/STOP] key.
(2) A confirmation message is displayed.
2. Screen status during data recording
Once recording start, progress is visible on the screen.
The displayed time is counts up or down.
(3) Push the [ENTER] key to start recording.
3. Stop recording
Push the [START/STOP] key to end the recording operation.
(1) Push the [START/STOP] key.
(2) Confirmation message is displayed. Push the [ENTER] key.
(3) Recording ends, and the GL240 goes into the Free Running mode.
The operation for data recording is complete.
Recoding message
elapsed time remaining time for recording
(The indication becomes ++++ when the available recording time is 9999 hours or more.)
14
Key Pointers
Recorded Data can be viewed while recording is in progress by pushing the [REVIEW] key.
Data is available for viewing from the start to the point of real-time recording while in
progress.
During data replay, arbitrary level values can be viewed by moving the cursor.
Return to the recording screen by pushing the [REVIEW] key again.
* The [DISPLAY] key allows you to switch between the 1-screen and 2-screen.
To Next Page
Loading...
