GRAPHTEC midi LOGGER GL240 - Descriptions of the Control Panel Keys

Descriptions of the Control Panel Keys
Push the [TIME/DIV] key to change the time axis display range on the waveform
screen.
2. TIME/DIV
The key allows SPAN, POSITION, and TRACE settings to be made independently
for each channel. When the key is pushed, the display mode changes in the
sequence shown below. Use the and keys to select the channel,
and the and keys to change the setting values.
1. SPAN/POSI/TRACE
Key Pointers
Displays digital values (default).
Change the span settings (change the waveform amplitude).
Change the position settings (adjust the upper and lower values of the
waveform).
Change the trace settings (set the waveform display to On or Off).
* If the [QUIT] key is pushed when the GL240 is in the SPAN, POSITION, or
TRACE mode, the display returns to MONITOR mode.
6
(4) QUIT
(3) MENU
(5) DIRECTION KEYS
(6) ENTER
(10) REVIEW
(9) DISPLAY
(11) FILE/GROUP
(2) TIME/DIV
(12) CURSOR (ALARM CLEAR)
(8) START/STOP (USB DRIVE MODE)
(7) FAST FORWARD (KEY LOCK)
(1) SPAN/POSI/TRACE
+ + ENTER
Password setting
MONITOR
SPAN
POSITION
TRACE