19
Specifications
Standard Specifications
Description
Item
External input and
output functions
Trigger input or External sample pulse (1ch),
Logic input (4ch) or Pulse input (4ch), Alarm output (4ch)
USB 2.0 (HighSpeed supported) ,
Wireless LAN (Required to install optional module.)
PC interface
Internal memory (SD1) : approx. 4GB
SD CARD2 slot: 1
(Compatible with SDHC, up to approx. 32GByte memory available)
* Possible to save up to 2GB for one file
Built-in memory device
10ms/1ch MAX
10/20/50/100/125/200/250/500ms, 1/2/5/10/20/30sec
1/2/5/10/20/30min, 1hour, External
* In the case of 50 ms or less, available settings vary depending on the input settings and
number of CHs to be measured.
Number of analog channel
Setup parameters: EEPROM/Clock: Lithium batteryBack-up functions
±0.002% (approx. 50 seconds per month)
[W×D×H] :188×117×42 mm
500 g
* AC adapter and battery are not included.
Equivalent to automobile parts Type 1 category A classification
Clock accuracy
(ambient temperature 23°C)
0 to 45°C, 5 to 85%RH
(0 to 40°C when operated in batteries/15 to 35°C when battery is charging)
Operating environment
AC adapter : 100 to 240 VAC, 50 to 60 Hz
DC input : 8.5 to 24 VDC (26.4 V max.)
Battery pack (option) : 7.2 VDC (2900 mAh)
Power supply
Power consumption
External dimensions
(approximate)
Weight (approximate)
Vibration-tested conditions
AC power consumption
* when using the AC adapter provided as a standard accessory
DC current consumption * Normal condition: LCD brightness is set to MAX.
Number of analog channels
10 channels
No
During recharging battery
NormalCondition
No
During recharging battery
NormalCondition
1
2
AC100 V
AC240 V
AC100 V
AC240 V
16 VA
24 VA
15 VA
22 VA
36 VA
52 VA
35 VA
51 VA
When the LCD is on
When the screen saver is operating
1
+24 V
+12 V
+8.5 V
2
3
4
5
6
0.24 A
0.22 A
0.42 A
0.37 A
0.58 A
0.53 A
0.61 A
0.59 A
When the LCD is on
When the screen saver is operating
When the LCD is on
When the screen saver is operating
When the LCD is on
When the screen saver is operating
External Input/Output Functions
Description
Item
Alarm output
specifications
Output format : Open collector output (5 V, 10 k pull-up resistance)
* Refer to the User's Manual in the supplied CD-ROM for more information.
Input specifications
(pulse/logic, trigger/
External sampling)
Maximum input voltage : 0 to +24V (single-ended ground input)
Input threshold voltage : approximate +2.5 V
Hysteresis : approximate 0.5 V (+2.5 V to +3 V)
Recharging battery
is not possible.
Recharging battery
is not possible.
To Next Page
Loading...
