A-type connector B-type connector
Internal memory
Mounting SD CARD 2
CAUTION: To remove a SD memory card, push in gently to release the card before pulling.
When the optional wireless LAN unit is installed, the SD memory card cannot be mounted.
The POWER LED blinks while accessing the SD memory card.
Connect with PC
GL240 midi LOGGER complies with the EMC Directive when the supplied ferrite core is attached to a USB
cable.
To connect a PC using a USB
cable, attach the supplied ferrite
core to the USB cable as shown.
To connect GL240 and PC, use a cable with A-type
and B-type connectors.
< How to remove >
(1) The SD memory card is
released by pushing
gently on the card.
Then, pull to remove the
card.
USB cable
Ferrite core (Supplied)
< How to mount >
(1) Open the protective cover to
SD CARD 2.
(2) Push the SD memory card
until it clicks and is locked.
* SD memory card
must be unlocked.
4
• The internal memory is displayed as SD1 or SD CARD1
• The internal memory is not removable.
To Next Page
Loading...
