GRASS VALLEY KALEIDO-MX - Page 20

6
Installation
Frame Interface
The number of supported connectors varies, depending on the Kaleido-MX (3RU) model.
The following table lists the supported number of each connector type, for every
Kaleido-MX
(3RU) model.
The diagrams below show the supported connector areas, for every Kaleido-MX (3RU)
model.
Kaleido-MX (3RU) 32 × 2
Number of connectors supported by Kaleido-MX (3RU) model
Connectors 32 ×2 32 × 4 48 × 2 48 × 4 64 × 2 64 × 4
3G/HD/SD inputs 32 32 48 48 64 64
HDMI outputs 2 4 2 4 2 4
HD-SDI monitoring outputs 2 4 2 4 2 4
Analog audio outputs 2 4 2 4 2 4
ABT/MADI audio inputs 2 2 3 3 4 4
LTC inputs 3 3 4 4 5 5
Reference inputs 2 2 2 2 2 2
Ethernet connector 2 3 2 3 2 3
RS-422 connector 1 2 1 2 1 2
GPI inputs 40 40 40 40 40 40
Configurable GPI
input/output
16 16 16 16 16 16
Output A Controller cardInput A, and Input B GPI I/O 1, and
GPI I/O 2 (opt.)
REF 1, and REF 2 (opt.)