12
Installation
Output Modules
Output Modules
The following table lists the function of each connector associated with the output heads,
on Output A, and Output B.
Connector label
Connector
type
FunctionHead 1 Head 2
MV OUT 1 MV OUT 2 HDMI High definition connection for the
multiviewer output, which carries audio
and video, and can support resolutions up
to 1920 × 1200 (all progressive scan)
SDI OUT 1 SDI OUT 2 DIN 1.0/2.3 Serial digital HD output signal for
monitoring purposes
ANALOG OUT 1 L ANALOG OUT 2 L WECO Analog audio output (left channel) to feed
the audio monitoring system
ANALOG OUT 1 R ANALOG OUT 2 R WECO Analog audio output (right channel) to
feed the audio monitoring system
SFP 1 SFP 2 — Optional ports. Not yet supported.
To Next Page
Loading...