GRASS VALLEY KALEIDO-MX - 3 Specifications; Kaleido-MX Inputs; Video Inputs (32, 48, or 64)

35
Specifications
This chapter lists equipment specifications for the Kaleido-MX (3RU) multiviewers and their
cards.
Kaleido-MX Inputs
Video Inputs (32, 48, or 64)
The supported video input types include SD-SDI, HD-SDI, and 3G-SDI (auto-detected). The
processing delay is two fields if the video inputs are genlocked, and two or three fields if the
video inputs are not genlocked. In rotation mode the processing delay may increase by one
field. Signal inputs require DIN 1.0/2.3 connectors.
SD-SDI inputs
Signal 4:2:2 SMPTE ST 259-C (270 Mbps), SMPTE ST 272
Formats 525 and 625
Audio SMPTE ST 274
Return loss > 15 dB up to 270 MHz
Alignment jitter (100 kHz) < 0.2 UI
Timing jitter (10 Hz) < 1 UI
Cable length 250 m (820 ft) (Belden 1694A)
150 m (492 ft) (Belden 1855A)
HD-SDI inputs
Signal SMPTE ST 292-1 (1.485, 1.485/1.001 Gbps)
Formats
a
720p29.97, 720p30, 720p50, 720p59.94
1080i50, 1080i59.94
1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30
Audio SMPTE ST 299
Return loss > 15 dB up to 1.5 GHz
Alignment jitter (100 kHz) < 0.2 UI
Timing jitter (10 Hz) < 1 UI
Cable length 100 m (328 ft) (Belden 1694A)
45 m (148 ft) (Belden 1855A)