150
Video signals
Baseband video signals in XCU mode
Baseband video signals in XCU mode
In XCU mode, video signals are available as baseband signals at the BNC back panel of the
XCU. Refer to the XCU UXF Series user’s guide for an overview of available video signals.
+
Note
+ ☞
Note
Make sure that you have installed the correct (Q)SFP modules that allow the selected video
mode and required bandwidth. Refer to Appendix E for more information about installing
(Q)SFP modules on the camera.
IP streams in XCU mode
In XCU mode, video signals are available as IP streams on the IP Media Network that is
connected to the IP Media Bay on the back panel of the XCU. Refer to the XCU UXF Series
user’s guide for an overview of available video streams.
+
Note
+ ☞
Note
Make sure that you have installed the correct (Q)SFP modules that allow the selected video
mode and required bandwidth. Refer to Appendix E for more information about installing
(Q)SFP modules on the camera.