Grasslin talento easy B1 - Cycle Program Date Range

102
EN
9. End - select day(s) of the week on which the switching program is to be ended and conrm with the
button.
The days of the week 1 – 7 are set by default. Individual days of the week can be set as
follows:
Days of the week can be selected with the
button.
Days of the week can be deselected with the
button.
10. End time – select hours and conrm with the
button.
11. End time – select minutes and conrm with the
button.
12. Cycle ON – select hours and conrm with the
button.
13. Cycle ON – select minutes and conrm with the
button.
To end the cycle, you have to set a CYCLE OFF command.
14. Cycle OFF – select hours and conrm with the
button.
15. Cycle OFF – select minutes and conrm with the
button.
16. Select
WITH DATE YES and conrm with the button. Selecting NO skips this function.
Option Entry Result
Program the clock timer without a date
range.
NO The switching commands are valid independently of the
date.
Program the clock timer with a date
range.
YES The switching commands are valid for the days or periods
that are defined in the programming.
17. Start date – select month and conrm with the button.
18. Start date – select day and conrm with the
button.
19. End date – select month and conrm with the
button.
20. End date – select day and conrm with the
button.
21. The settings will be adopted.