Grasslin talento easy B1 - Pulse Program Date Range

105
EN
9. End - select day(s) of the week on which the switching program is to be ended and conrm with the
button.
The days of the week 1 – 7 are set by default. Individual days of the week can be set as
follows:
Days of the week can be selected with the
button.
Days of the week can be deselected with the
button.
10. Select end time – hours and conrm with the
button.
11. Select end time – minutes and conrm with the
button.
12.
PULSE ON SECOND – set pulse duration and conrm with the button.
13. Select
WITH DATE YES and conrm with the button. Selecting NO skips this function.
Option Entry Result
Program the clock timer without a date
range.
NO The switching commands are valid independently of the
date.
Program the clock timer with a date
range.
YES The switching commands are valid for the days or periods
that are defined in the programming.
14. Start date – select month and conrm with the button.
15. Start date – select day and conrm with the
button.
16. End date – select month and conrm with the
button.
17. End date – select day and conrm with the
button.
18. The settings will be adopted.