8
MANUAL OVERRIDE FUNCTIONS
While the timeswitch is in the “RUN PRESET PROGRAM” or “RUN OWN PROGRAM” mode, and without having to
open the keypad cover, you can manually override the program without disrupting the original settings by pressing the
“SELECT” button.
TMD (Timed)
When the “RUN PRESET PROGRAM” or “RUN YOUR OWN PROGRAM” mode is active, the arrow points to TMD
BOOST Press the “SELECT” The timeswitch will
To switch ON button until the arrow in automatically retun to the
for 1 hour the display points to BOOST timed function after 1 hour.
ADV Press the “SELECT” The timeswitch will
To switch ON button until the arrow in automatically go back to the
(or OFF) early the display points to ADV timed function according to the
(Advance) next programmed entry.
To Next Page
