Grasslin Towerchron QE1, QE2 - 2 Setting Your Own Hot Water Times

28
SETTING YOUR OWN HOT WATER TIMES:
➯ Move the slide switch to position “SET OWN PROGRAM”
Press the “HOT WATER” button.
The first program place is displayed.
1. To store Hot Water “ON” time and day combination:
➯ Press the “HOUR +/-” then “MINUTES +/-” buttons
➯ Press the “DAY” button to select day/day groups
2. To store Hot Water “ON” time and view the next program space
➯ Press the “HOT WATER” button
3. To set the first Hot Water “OFF” time and day combination
➯ Press “HOUR +/-” then “MINUTES +/-” buttons
(the day/day groups that were selected during “ON” time
programming are still in memory for this “OFF” time)