25
2. To copy the first “ON” time for Hot Water:
➯
Press “COPY” button
The arrows on the Hot Water side of the display will flash to confirm the
copy instruction has been carried out.
The display now jumps to the next free program space so that the OFF time can be input. Repeat steps 1 to 2 to
enter further “ON” and “OFF” times.
28 program places are available.
After completing your own program:
➯
Move the slide switch to position “RUN OWN PROGRAM”
NB • The current time is displayed and your own program is
now active.
To Next Page
Loading...
