GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY 
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten!    ID# 47496    10/2003 
29
 
 
106  Stern flagstock  2  Plywood  Laser-processed, 1.0 mm 
107  Ventilator  6  Plastic  Ready made 
108  Forward handrail  2  Plywood  CNC-trimmed, 2.0 mm 
109  Roof railing  2  Plywood  CNC-trimmed, 2.0 mm 
110  Mast  3  Plywood  CNC-trimmed, 2.0 mm 
111  Radar support  1  Plywood  Laser-processed, 2.0 mm 
112  Transverse support  1  Plywood  Laser-processed, 1.0 mm 
113  Radar bearer strut  1  Plywood  Laser-processed, 1.0 mm 
114  Lamp bearer  2  ABS  1.0 mm, make from scrap 
115  Anchor light bearer  1  ABS  1.0 mm, make from scrap 
116  Hinge plates  2  ABS  1.0 mm, make from scrap 
117  Stern lamp bearer  1  ABS  1.0 mm, make from scrap 
118  Stern lamp bearer strut  1  ABS  1.0 mm, make from scrap 
119  Radar housing  2  Plastic  Ready made 
120  Radar antenna  1  Plastic  Ready made 
121  Boat lamps  3  Plastic  Ready made 
122  Anchor light  1  Plastic  Ready made 
123  Throttle lever  2  Plastic  Ready made 
124  Telephone handset  1  Plastic  Ready made 
125  Foghorn  1  Plastic  Ready made 
126  Windscreen wiper  3  Plastic  Ready made 
127  Lifebelt holder  1  ABS  Vac.-moulded, 1.0 mm 
128  Lifebelt 1  Plastic  Ready made 
129  Railing stanchion  26  Plated brass  Ready made, some require shortening 
130  Handrails  2  Beech  Flexible wood strip, 5 x 2 mm, overlength 
131  Bottom rail  2  Braided wire  0.1 mm Ø, overlength 
132  Forward flagstock  1  Beech  3 Ø x 70 mm, taper as shown 
133  Top cover plate 1  ABS  1.0 mm, make from scrap 
134  Cleats  8  Plastic  Ready made 
135  Fairleads  8  Plastic  Ready made 
136  Navigation lamp bracket, left  1  ABS  1.0 mm, make from scrap 
137  Navigation lamp bracket, right  1  ABS  1.0 mm, make from scrap 
138  Navigation lamps  2  Plastic  Ready made 
139  Velcro (hook-and-loop) tape  1  Plastic  Ready made, overlength 
-  Loudspeaker box  1  ABS  Vac.-moulded, 2.0 mm 
The Parts List includes components which are not contained in the kit; these must be obtained separately. 
 
You will also need the following items (not included in the kit) 
2 x SPEED 600 BB Turbo electric motors, Order No. 3302 
1 x suppressor capacitor, Order No. 3588 (pack of 2) 
1 x NAVY V 40 R speed controller, Order No. 2875 
2 x SANYO 6N-4000 DRL drive batteries, Order No. 2516 
1 x G2 distributor cable, Order No. 3068 
1 x G2 parallel cable, Order No. 3061 
1 x copper flex, 2 m, Order No. 3389 
2 x G2 connector systems, Order No. 2989 
 
Radio control system 
1 x MC-10 radio control set, Order No. 4721 
or 
1 x MC-12 radio control set, Order No. 4725 
Other Graupner/JR FM computer radio control systems on the 40 MHz band can also be used.