16 / 28
S1005_S1006_jp_V1
Charging socket
Through the charging socket you can charge the transmitter
battery using the supplied plug-in charger.
DO NOT USE PLUG-IN CHARGERS BY OTHER MANUFACTURERS OR
OTHER CHARGERS.
The maximum charge current is 1,5 A.
More information are available in the section "Charging the trans-
mitter battery".
Fixtures
Attaching the transmitter neck-strap
On the upper side of the transmitter there is an orientable eyelet
which can be used to hook a neck-strap.
To Next Page
Loading...
Need help?
General
