To Next PageTo Next PageWhy does the hour meter continue to run when engine is not running on my Gravely ZT2352?
If the hour meter on your Gravely Lawn Mower continues to run when the engine is off, it is likely because the ignition key is in the run position. Simply turn the ignition key to the off position.
Why does my Gravely Lawn Mower engine run rough?
A rough-running engine on your Gravely Lawn Mower could be due to: * The choke being engaged; disengage it. * A plugged air filter cartridge; clean or replace it.
Why does my Gravely ZT2352 engine overheat?
Your Gravely Lawn Mower engine may overheat due to: * Low engine oil level; add engine oil. * A plugged cooling system; clean the cooling system.
General| Engine Type | Kawasaki FR691V |
|---|---|
| Horsepower | 23 HP |
| Cutting Width | 52 inches |
| Cutting Deck | Fabricated |
| Speed | 8.5 mph forward / 4 mph reverse |
| Deck Lift | Foot Operated |
| Cutting Height Range | 1.5 - 4.5 in |
Explains the meaning of safety alert symbols used in the manual and on decals.
Defines the severity levels of safety messages: Danger, Warning, and Caution.
Highlights dangers associated with rotating parts and fuel handling.
Provides critical safety instructions for avoiding serious injury or death.
Details specific hazards like discharge, backing, children, slopes, and hot surfaces.
Outlines essential safety rules for operation, maintenance, and general use.
Covers operator qualifications, alertness, protective gear, and handling sharp/moving parts.
Provides detailed guidance on operating safely on slopes, including speed and turning.
Details safe practices for handling fuel, filling tanks, and transporting the unit.
Covers battery safety, connections, charging, and avoiding electrical hazards.
Identifies and locates all controls and features using Figure 4.
Explains the safety interlock system and provides tests to verify its proper function.
Provides step-by-step instructions for starting and stopping the engine.
Lists critical checks and tasks to perform before or after each use.
Emphasizes testing the safety interlock system before each operation.
Step-by-step instructions for removing the mower deck.
Explains how to test and adjust the electric clutch for proper blade stopping.
Procedures to test the electric clutch function after adjustment.
Lists probable causes and corrections for engine starting issues.
Troubleshoots problems related to unit movement and PTO/blade engagement.
Provides dimensions, weight, tire information, and mower deck specifications.
Outlines the terms, conditions, and duration of the limited warranty.
