CWT7 USER AND SERVICE MANUAL
Revision: 03/2018 Page: 4
Key DESCRIPTION
BASIC FUNCTION OPERATION
Press and hold this key for 2 seconds to turn off the balance.
Press this key to turn on the balance
UNITS To select the desired weight unit.
ESC To exit from setup mode.
ZERO To reset the weight to “0”, but the display value has to be
lesser than
±
2% of maximum capacity.
To move one space to the left or downward in setup mode.
TARE To subtract the container´s weight.
To move one space to the right or upward in setup mode.
N/G To view gross or net weight when the balance is on tare status.
All other keys will be disabled when gross weight is activated.
To increase value in setup mode.
PRINT Manually transmitting data through RS232 to print.
Confirmation in setup mode.
To Next Page
Loading...
