GRAVOGRAPH LS100 ENERGY

Need help?

Do you have a question about the GRAVOGRAPH LS100 ENERGY and is the answer not in the manual?

Summary

D. Required safety labels

E. Introduction

3. Work station safety

Safety instructions for the work station, including machine operation and air extraction.

G. Laser safety

1. Recommendations and safety regarding laser devices

Safety information concerning laser devices, including machine classification and personnel safety.

2. Work station safety

Guidelines for work station safety, focusing on restricted laser areas and personnel access.

3. optical components

Safety precautions and measures for handling and maintaining optical components like lenses and mirrors.

4. Potential hazards related to materials worked with

Information on hazards from fumes and particles emitted by materials during laser marking.

5. High voltage safety - (only for ENERGY machines)

Safety measures related to high voltage components within the ENERGY machines.

H. Description of the machine

I. Recommendations for installation

1. Physical installation

Guidelines for placing the machine, ensuring proper ventilation and environmental conditions.

2. Water chiller (only for ENERGY machines)

Recommendations for the water chiller installation, focusing on ventilation and temperature.

3. Air extraction system (optional)

Requirements and recommendations for installing an air extraction system for fume and gas removal.

4. Air assist (option: Air compressor)

Instructions for connecting and using the air assist system with an air compressor.

7. Connecting;disconnecting the water chiller - Filling the tank (only for ENERGY machines)

Procedure for connecting, filling, and disconnecting the water chiller for ENERGY machines.

8. Electrical installation

Guidelines for safe and compliant electrical installation, including power supply and interference avoidance.

J. Connections - Installation

1. Power supply connection Water chiller (only for ENERGY machines)

Procedure for connecting the power supply to the water chiller and switching it on.

K. Connections - Installation

1. Power supply connection - Machine

Procedure for connecting the machine's power supply and link cables.

Using the PLC function (User standard inputs;outputs)

Guide to configuring and using the PLC function for automated line integration.

Machine; PC connection (USB connection)

Instructions for connecting the machine to a PC using a USB cable.

L. Operating instructions for the machine

1. Control panel

Overview of the machine's control panel, its buttons, and their functions.

2. Description of the human-machine interface

Explanation of the human-machine interface elements, including the joystick and indicator lights.

M. Using the machine

1. Switching on the PC; Switching on the machine

2. Creating the composition

3. Setting the driver properties

4. Transferring the file

5. Positioning the object to be engraved

6. Focusing

7. Start-up engraving

8. Removing and reloading material

O. Preventive maintenance

1. General maintenance

3. Cleaning the system

4. Optics maintenance

5. Removing and cleaning the Z Auto sensor

6. Autofocus adjustment

7. Setting point zero (Origin)