GRAVOGRAPH UNICA TX - User Manual

Guide d'utilisation
User guide
Bedienungsanweisung
UNICA TX - IS200 TX
Tourne-cylindre
Cylinder attachment
Abrollvorrichtung
A lire en priorité
Please read carefully before use
Vor Inbetriebnahme zu lesen
B5213799 - 03.97 - FED - (INDICE DE REVISION : 2)
(UPDATED EDITION NUMBER : 2)
(NEUFASSUNG NUMMER : 2)

Summary

Presentation

Features and Technical Data

Details the features and technical specifications of the cylinder attachment.

Contents of Package

Description

Cylinder Attachment Assembly

Details the components of the cylinder attachment assembly shown in photo 1.

Connecting Plate (Relay Kit)

Describes the connecting plate for the relay kit used to link the attachment to the machine.

Mandrel and Back-edge Support

Mandrel Details

Details the fixed mandrel, its tightening ring, and the three jaws.

Back-edge Support Details

Details the sliding support, back-edge, and its related components.

Installation

Dismounting the TX Vice

Step-by-step instructions for safely removing the TX vice from the machine.

Mounting the Cylinder Attachment

Instructions for physically attaching the cylinder attachment to the machine.

Connecting the Cylinder Attachment

Procedure for plugging the cylinder attachment cable into the machine's 5-pin socket.

Instructions for Use

Precautions for Use

Key safety guidelines and operational limits for using the cylinder attachment.

Setting-up the Cylinder Attachment

Steps to prepare the cylinder attachment, including mounting jaws and cones.

Clamping the Object

Detailed steps for securing the object into the mandrel and back-edge support.

Slanted Object Handling

Instructions on how to incline the object for engraving at an angle.

Stepped Jaws Usage

Information on ordering and mounting stepped jaws for specific clamping needs.

GRAVOGRAPH UNICA TX Specifications