To Next Page
C
ChrisOct 19, 2026
My horizonal belt on my engraver needs to be tightened. I need a video on how to tighten it. Thank you.
My horizonal belt on my engraver needs to be tightened. I need a video on how to tighten it. Thank you.
Expresses gratitude for choosing the LS100IQ EX Energy and Gravotech's solutions.
Provides essential information for security and productivity, urging manual reading before operation.
Describes the LS100 IQ/EX and LS100 ENERGY/EX ENERGY as engraving, marking, and cutting machines.
Explains how to identify the marking equipment via an identification plate on the rear face.
Details safety measures for the work station, including machine shutdown and door integrity.
Specifies operational requirements for the water chiller essential for ENERGY machine laser sources.
Provides instructions on safely moving and handling the machine, emphasizing care for the head.
Details the steps for unpacking the machine and its components, including strap removal.
Lists the contents included in the machine package and the toolbox for setup and operation.
Covers general recommendations and safety protocols for laser devices, including personnel safety.
Details safety requirements for the laser work station, including warning labels for controlled zones.
Provides general safety instructions for laser operation and guidelines on wearing safety glasses.
Outlines safety precautions for handling and cleaning optical components like mirrors and lenses.
Specifies procedures for the proper disposal of optical components and related hazardous waste.
Discusses potential hazards associated with materials used in laser marking, including fumes and radiation.
Details high voltage safety measures specific to ENERGY machines, emphasizing isolation and technician access.
Illustrates and labels the key components visible from the front of the machine.
Identifies and describes the connectors and openings located on the rear of the machine.
Provides front and rear views of the industrial chiller used for cooling ENERGY machine laser sources.
Outlines requirements for placing the machine, including surface stability, leveling, and ventilation.
Details water chiller cooling parameters and minimum characteristics for the optional air extraction system.
Explains the requirements and configuration for the optional air assist system using an air compressor.
Lists the minimum and recommended IT hardware configurations and software compatibility for Laserstyle.
Provides step-by-step instructions for connecting, filling, and disconnecting the water chiller.
Details the procedure for disconnecting the water chiller for shipping purposes.
Specifies requirements for connecting the machine to the power supply, including grounding and interference avoidance.
Explains how to connect the power supply to the water chiller and switch it on.
Provides guidance on resolving issues if the water chiller does not switch on or encounters problems.
Details the power supply connection for the machine, including safety precautions for cables.
Explains how to use the PLC function for machine operation in automated lines and configure inputs/outputs.
Provides detailed characteristics of the Sub-D15 connector's inputs and outputs for PLC integration.
Guides on switching the machine on, its readiness status, and troubleshooting common power-on issues.
Details procedures for powering down the machine and water chiller, and for restarting the system.
Explains the process for connecting the machine to a PC using a USB cable.
Introduces the machine's control panel, detailing its buttons and functions for engraving/marking.
Describes the human-machine interface elements like the joystick and indicator lights.
Guides the user on how to access the machine's menus, select options, and confirm actions.
Explains the control panel of the water chiller, including indicator lights, reset, and parameter functions.
Details temperature and flow alarm functions, and explains general parameters for the chiller.
Provides instructions on how to access and modify advanced parameters for the industrial chiller.
Covers switching on the PC and machine, creating compositions, and setting driver properties.
Explains how to transfer files to the machine and position the object for engraving.
Details the process of focusing the laser beam, including automatic autofocus adjustment.
Covers starting the engraving process and procedures for removing and reloading materials.
Describes accessories for marking cylindrical parts and supporting materials for cutting.
Details accessories for air assist function and the honeycomb cutting table for fume management.
Provides general guidelines for machine maintenance, emphasizing unplugging the power supply.
Details cleaning procedures for the engraving table, guides/belts, and fume extraction outlets.
Outlines procedures for visual inspection and cleaning of mirrors and lenses, advising against finger contact.
Provides step-by-step instructions for removing, cleaning, and replacing the Z Auto sensor.
Details the procedure for adjusting the autofocus using the specified gage and machine menus.
Guides on setting the machine's origin point (zero) using the control panel and a test plate.
Details the physical dimensions, weight, and surface flatness for LS100 IQ/ENERGY and LS100 EX/EX ENERGY models.
Provides specifications for engraving speed, repeatability, laser classification, source, and wavelength.
Specifies noise emission levels according to ISO 11201 and defines operating/storage environmental conditions.
Lists electrical characteristics, including voltage and current, and details connections and cabling.
Provides detailed specifications for the water chiller, including dimensions, cooling capacity, and fluid.
Explains how to switch on the machine and access the main engraving menu structure.
Describes the 'Parameters' sub-menu used for managing job parameters like power and speed.
Details the 'File' sub-menu functionality for managing imported files, including deletion.
Explains the 'Info' sub-menu for viewing information related to imported files.
Describes the 'Configuration' sub-menu for setting general machine parameters like language and port.
General| Connectivity | USB |
|---|---|
| Operating System Compatibility | Windows |
| Laser Type | CO2 |
| Software | Gravostyle |
| Laser Source | CO2 |
| Maximum Speed | 2.54 m/s |
| Resolution | 1000 dpi |
| Engraving Speed | Up to 2.54 m/s |
| Supported Materials | Acrylic, Wood, Glass, Leather, Plastic |
| Power Supply | 50/60 Hz |
