GRAVOGRAPH LS100 EX - Water Chiller Troubleshooting

37
M_LS100IQ EX Energy_EN_C
Connections - Installation
 Resolution of the problems: Water chiller
If the chiller does not switch on:
• Checkthatthepowercordisconnectedcorrectly,onboththechillersideandmainsside.
• Checkthatthereispowertothemainsplug.
The chiller switches on but encounters a problem:
• Checkthattheintakeandoutletvalvesarecorrectlyopened.
• Checkthewaterlevelinthetank.
• Checkthatthewaterhosesarecorrectlyconnectedbetweenthechillerandthelasermachine.