GRAVOGRAPH LS100 V1 User Manual

NOTICE TECHNIQUE LS100
LS100 TECHNICAL MANUAL
Date : June 2009 From
Aftersales Technical Support
Ref. LS100 GB/FF - Vers. 1.0
Page 1
Servicing Manual
Manuel Technique
LS100 machine V1 & V2
Machine LS100 V1 et V2
English – French
September 2011 from After Sales Technical Support

GRAVOGRAPH LS100 V1 Specifications

General

Connectivity	USB
Technology	CO2 Laser
Resolution	Up to 1200 dpi
Operating System Compatibility	Windows
Software Compatibility	Gravostyle
Engraving Area	460 x 305 mm
Weight	45 kg
Power Supply	100-240 V, 50-60 Hz

Summary

Adjustment Procedures

Laser Beam Adjustment (LS100-A02)

Procedure for aligning the laser beam for optimal engraving quality.

Focal Distance Adjustment (LS100-A04)

Procedure for setting the correct focal distance of the laser.

Zero Point Adjustment (LS100-A05)

Procedure for calibrating the machine's zero point for accurate positioning.

Characteristics

Technical Specifications (LS100-T01)

Details physical, environmental, electrical, and connection specifications.

Firmware and Driver Details (LS100-T02)

Information on supported languages, file formats, and operating systems.

Troubleshooting

Breakdowns with Error Messages (LS100-TS01)

Guide to diagnosing and resolving faults indicated by specific error messages.

No Laser Beam Issue (page 171)

Troubleshooting steps for when no laser beam is emitted.

Spare Parts List

Maintenance Procedures

Replacing the Top Door (LS100-02)

Procedure for replacing the top door assembly on the machine.

Replacing the Door Sensor (LS100-03)

Procedure for replacing the door detection sensor.

Replacing the X Motor (LS100-06)

Procedure for replacing the X-axis stepper motor.

Replacing the Laser Tube Power Supply (LS100-24)

Procedure for replacing the laser tube power supply unit.