Need help?Do you have a question about the GRAVOGRAPH LS100 IQ and is the answer not in the manual?
General| Technology | CO2 Laser |
|---|---|
| Laser Power | 30W |
| Connectivity | USB |
| Software | Gravostyle |
| Power Requirements | 110-240V, 50/60Hz |
| Work Area | 460 x 305 mm |
| Resolution | 1000 dpi |
| Materials | Acrylic, Wood, Glass, Leather, Plastic, Rubber |
| Engraving Area | 460 x 305 mm |
Common safety labels for laser beam and electricity warnings.
Specific safety labels for LS100, LS100 Ex, LS100 Energy models.
Safety labels specific to the LS100 Ex Fibre and LS900 Fibre.
Safety labels for Laser Solution Fiber, Hybrid, and Green-Series.
Essential safety rules for the work station and machine operation.
Guidelines for operating and maintaining the water chiller for ENERGY machines.
Recommendations and safety regarding laser devices, including personnel safety.
Safety measures for the work station and restricted laser zones.
General instructions to avoid laser radiation exposure and eye safety.
Safety precautions for handling and cleaning optical components like lenses.
Potential hazards from materials and safe disposal of laser components.
Safety measures related to high voltage components in ENERGY machines.
Guidance on placing and positioning the machine for optimal operation.
Step-by-step instructions for connecting and filling the water chiller tank.
Recommendations for safe and compliant electrical connections.
Description of the machine's control panel and its functions.
Explanation of temperature and flow alarm functions and error codes.
Adjusting page size and entering text for engraving in graphics software.
Procedure for transferring engraving files from PC to the machine.
Guidance on focusing the laser, including autofocus operation.
Steps to start engraving, manage fumes, and reload material.
Instructions for removing and reloading material for continuous engraving.
Guidelines for general cleaning, dust removal, and component care.
Visual inspection and cleaning of mirrors, lenses, and beam window.
Step-by-step guide to adjusting the autofocus system using a gage.
To Next Page
