Gree FLEXX36HP230V1AO - Page 89

GREE DC INVERTER HEAT PUMP CONDENSING UNIT
86
Removal of front panel
NOTE: Before removing the front panel, make sure power is cut off.
Step
Picture
Work instruction
6. Install the grill.
 Attach the grill back in place
and tighten up the screws.
7. Remove the valve cover
 Unscrew the screws of the
valve cover with a
screwdriver.
8. Remove the right side plate.
 Unscrew the screws that
connect the right side plate
to the electric box and the
screws around the right side
plate.
9. Install the right side plate.
 Screw up the screws around
the right side plate. Be
careful to handle well the
clasps at the bottom of the
right side plate.