Gree FLEXX36HP230V1AO - Page 95

GREE DC INVERTER HEAT PUMP CONDENSING UNIT
92
Model: FLEXX60HP230V1AO
Removal of fan and motor
NOTE: Before removing the fan, make sure power is cut off.
Step
Picture
Work instruction
1. Remove the grill.
 Use a screwdriver to
unscrew the two screws on
the upper left and lower
right corners.
2. Remove the fan.
 Use a wrench to remove the
specialized nut and gasket
of the fan.
NOTE: Please keep the nut
and gasket safe after
removing them from the fan.
3. Remove motor.
 Use a screwdriver to
unscrew the bolt of motor.
NOTE: Motor wire should
be first removed from the
electric box.