Gree FLEXX60HP230V1AO - Page 93

GREE DC INVERTER HEAT PUMP CONDENSING UNIT
90
Disassembly of compressor
NOTE:Before removing the compressor, make sure there is no refrigerant in the pipeline and power is cut off.
Step
Picture
Work instruction
7. Connect the compressor
wires.
 Connect the compressor
wires to the wire terminals
on the top of compressor.
NOTE: When connecting
the wires, be sure to match
the colors with the
corresponding wire
terminals.
Model: FLEXX60HP230V1AO
Removal of 4-way valve
NOTE:Before removing the 4-way valve, make sure refrigerant is fully discharged from the unit and power is cut off.
Step
Picture
Work instruction
1. Take off the coil of the 4-way
valve.
 Carefully unscrew the
screws of electromagnetic
coil with a screwdriver.