Vertical Exposed Fan Coil Unit
7
Open the cover. Loosen three screws and lift the decorated panels (on left or right side) 1cm above and
remove them in a horizontal way.
Open the cover
Loosen screws
Lift the decorated panels
(on left or right side) 1cm above
After
Before
Remove it in
Suspension hole
Suspension hole
a horizontal way
Hang the unit by ting the holes into expansion bolts.
Regulate the unit position to slightly tilt the drain pipe and tighten bolts with nuts.
Suspension hole
Suspension hole
Wall
Nut
Bolt
To Next Page
Loading...
