Gree FP-22LM/D-K User Manual (English)

Other manuals for Gree FP-22LM/D-K

Questions and Answers:

R
Roger PrestonAug 14, 2025
What to do if my Gree Air Conditioner is leaking water?
- K
  Kristen Richardson PhDAug 14, 2025
  If you notice water leaks in your Gree Air Conditioner, start by cleaning the condensate pipe to ensure it is not clogged. Check that the unit is installed correctly, maintaining a slight inclination. Reduce environmental air humidity by avoiding high-temperature, high-humidity air entering the room. If the fan stops but cold water continues to supply, close the water dampers or run the unit. Also, ensure the discharge valve is tightened.
P
Pamela JohnstonAug 17, 2025
How to fix abnormal noise in my Gree Air Conditioner?
- W
  William LopezAug 17, 2025
  If your Gree Air Conditioner is making abnormal noises, check for the following: deformed volute or blade (replace if necessary), a clogged air filter (clean it), foreign matter in the inlet/outlet or duct (remove it), motor noise (replace the motor), and loosened fastening screws (tighten them).
C
Charles PrinceAug 21, 2025
What to do if my Gree Air Conditioner does not turn on?
- L
  Lisa RobinsonAug 21, 2025
  If your Gree Air Conditioner does not run, check if there is a power supply available and repower the unit if needed. Ensure the power plug is securely tightened. If the motor is burnt out, replace it and inspect the wiring.
A
andrewberryAug 25, 2025
Why is the cooling or heating effect poor in my Gree FP-22LM/D-K Heat Pump?
- H
  Hunter EvansAug 25, 2025
  If your Gree Heat Pump isn't providing sufficient cooling or heating, start by cleaning the air filter. Also, ensure the dampers are fully opened. Check the fins for clogs or damage and clean or repair them as needed. Finally, verify that the entering water temperature is appropriate for cooling; adjust if necessary.
M
Mark WilliamsAug 27, 2025
What to do if Gree Heat Pump does not run?
- J
  Jennifer WiseAug 27, 2025
  If your Gree Heat Pump isn't running, first, make sure there is a power supply. If there isn't, repower the unit when the power supply is available. Next, check that the power plug is securely tightened. If it still doesn't work, the motor might be burnt out, in which case you should replace the motor and check the wiring.
N
nelsonkarenAug 30, 2025
What to do if there is abnormal noise in Gree FP-22LM/D-K Heat Pump?
- K
  Kayla WaltonAug 30, 2025
  If you notice abnormal noise coming from your Gree Heat Pump, there could be several reasons. Start by checking if the volute or blade is deformed, or if the volute contacts the blade; if so, replace the volute or the blade. Ensure the air filter is clean. Remove any foreign objects from the inlet/outlet or inside the duct. If the noise persists, the motor may need replacing. Also, check and tighten any loose fastening screws.
V
Vanessa EstradaSep 3, 2025
How to increase airflow rate in Gree FP-22LM/D-K?
- S
  sjohnsonSep 3, 2025
  If your Gree Heat Pump's airflow rate is too low, the first thing you should do is clean the air filter. Also, check for any foreign objects blocking the return inlet and air outlet, and clear them away. If the issue persists, the duct resistance may be too high; consider lowering it or reselecting the unit.
T
Tracy WagnerSep 6, 2025
Why is the cooling or heating effect poor in my Gree Air Conditioner?
- R
  Renee RobbinsSep 6, 2025
  If your Gree Air Conditioner is not cooling or heating effectively, first check and clean the air filter. Ensure the dampers are open. Inspect the fins for clogs or damage, and clean or repair them as needed. If you are using water cooling, adjust the entering water temperature to the appropriate level.
S
sheri40Sep 10, 2025
Why is the airflow rate too low in my Gree Air Conditioner?
- J
  Jennifer WoodSep 10, 2025
  If your Gree Air Conditioner's airflow rate is too low, start by cleaning the air filter. Then, check for any foreign objects blocking the return inlet and air outlet, and remove them. If the duct resistance exceeds the design value, lower the duct resistance or consider reselecting the unit.

Gree FP-22LM/D-K Specifications

General

Cooling Capacity (BTU)	24000
Power Supply (V)	220-240
Running Current Cooling (A)	10.5
EER (BTU/W)	10.4
Refrigerant	R22
Cooling Capacity (kW)	7.03
Noise Level (Outdoor) (dB)	56
Power Supply (Hz)	50