Gree FP-22LM/D-K - Page 18

Vertical Exposed Fan Coil Unit
15
3.3.4 Temperature setting
(1) During the operation of the unit, press (UP) or (DOWN) to raise or lower the temperatures.
(2) When the temperature unit is Celsius, one press of the UP key or the DOWN key causes a 0.5°C
increase or decrease within 16°C~30°C.
(3) When the temperature unit is Fahrenheit, one press of the UP key or the DOWN key causes a 1°F
increase or decrease within 61°F~86°F.
(4) When keeping pressing the UP key or the DOWN key, the temperature varies every 0.5 second.
(5) As shown in Figure 3, the indoor ambient temperature display, if activated, will appear by default after
the unit is started. A desired temperature being set appears temporarily. Later, the default temperature
will reappear without any operation in 5 seconds.
Figure 3
Celsius Fahrenheit
3.3.5 Timer
(1) The unit is timed to start or stop, ranging from 0.5 to 24 hours.
(2) As shown in the Figure 4, after starting the unit, to keep pressing (SPEED) for about 5 seconds
(press keeping hereinafter lasts 5 seconds) can disable or enable the timer. When enabling the
timer, the symbol ashes. A press of (UP) or (DOWN) increases or reduces 0.5 hour in
the amount of time. A press of (SPEED) ensures saving the timer setting. The symbol stops
ashing and continue to be visible, which means the timer has been working and the countdown is
displayed.
(3) After a stoppage of the unit, the unit is specied a time to start in the way to stop. The countdown will
be displayed.
Figure 4
Notes:
During the timing process, the homepage is shown by default after 5 continuous seconds without a
key press. In this case, press keeping of (UP) or (DOWN) adjusts the amount of time every 0.5
second.