GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
136
If no exception is detected, the main board is displayed as follows and the unit automatically enters
the next commissioning step.
06_Component
detection for ODU
The system detects
that no ODU
component fails and
automatically enters
the next step.
If an exception is detected, the unit retains the current status and waits for manual troubleshooting.
Corresponding faults include:
06_Component
detection for ODU
The system detects
component failure of
ODU.
For details about the above troubleshooting method, refer to the "Troubleshooting Method" part.
Step 11: Unit commissioning step 07 is component detection for IDU.
If no exception is detected, the main board is displayed as follows and the unit automatically enters
the next commissioning step.
07_Component
detection for IDU
The system detects that
no IDU component fails
and automatically enters
the next step.
If an exception is detected, the unit retains the current status and waits for manual troubleshooting.
Corresponding faults include:
To Next Page
Loading...
