GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
284
1.5. Using Debugger
1.5.1 Major Functions
1.5.1.1 One-Click Engineering Debug
Engineering debug personnel can use this software to debug units based on engineering debug
logic by one-click operation. The minute you deliver a debug command through the software, units begin
automatic debug step by step. When the units pass debug of a step, the step is automatically checked
green. If they fail this step, it will be checked red.
1.5.1.2 All-Round Monitor and Health Analysis
All-round monitor on the air conditioning systems, including functions, devices, and parts is
supported. Intuitive and clear display facilitates users to understand running of the entire systems and
units.
1.5.1.3 Real-Time Control and Running Mode Adjustment
Air conditioner operation time and requirement on the air conditioners vary with geographical
locations. Users can adjust parameters of air conditioning units through a PC based on the actual
situation of an area, including start/stop, temperature, airflow speed, and mode. Gree Debugger also
enables users to set and query parameters for ODUs and gateways.
1.5.1.4 Other Functions
Gree Debugger also instructs users to connect units, and allows users to capture screens, open
database files, rebuild database, and modify database file saving path.
1.5.2 How to Use Gree Debugger
1.5.2.1 Viewing Unit Parameters
Run Gree Debugger.
On the initial page, select a language and unit. If you want to use default settings, click ―OK‖ to
enable Gree Debugger.
To Next Page
Loading...
Need help?
General