Gree GMV-ND07PLS/A-T(U) - Page 171

GREE Multi Variable Air Conditioners Indoor Unit
165
Removal of Fan Motor
Remark: before removing, making sure power is disconnected.
Step
Diagram
Operation Procedure
(6) Remove
the main
board.

Release the wiring terminals
connected to the main board.

Remove the main board.
(7) Remove
the
electrical
box.

Unscrew the screws fixing the
electrical box with a
screwdriver.

Remove the electrical box.
(8) Remove
the
evaporator.

Use a screwdriver to unscrew
the screws fixing the press plate
of connection pipe on the back
of the unit and take off the press
plate.

Unscrew the screws of
evaporator with a screwdriver
and then remove the
evaporator.
(9) Remove
motor’s
pressing
plate.

Unscrew the fixing screws of the
pressing plate with a
screwdriver and then remove it.
(10) Remove
the motor
and fan.

Take off the motor and fan
directly.

Use a screwdriver to unscrew
the screws connecting the
motor and the fan.
(11) Install a
new motor.

Assemble units based on the
reverse order of this procedure
and power on the units for test.