Gree GMV-ND07PLS/A-T(U) - Page 183

GREE Multi Variable Air Conditioners Indoor Unit
177
Motor and fan
Precondition: The power supply has been disconnected.
Step
Diagram
Operation Procedure
(5) Remove the
motor.

Remove the motor from the
support and remove the
centrifugal fan from the motor
axle. Then, remove the motor.

For motors that are
accompanied with supports,
the supports need removing as
well.
(6) Install a new
motor.

Assemble units based on the
reverse order of this procedure
and power on the units for test.
GMV-ND72PH/B-T(U) / GMV-ND96PH/B-T(U)
Motor and fan
Precondition: The power supply has been disconnected.
Step
Diagram
Operation Procedure
(1) Remove the
line
connecting to
the motor.

Use a screwdriver to unscrew
the electric box cover.

Remove from the master board
the line connecting to the
motor and remove the tie.
(2) Disassemble
the seal plate
and cover
plate.

Use a screwdriver to unscrew
the seal plate and cover plate
and then remove them.
(3) Remove the
grille

Use a screwdriver to unscrew
the cover plate component.
(4) Remove the
centrifugal
fan.

Use a screwdriver to unscrew
the front volute casing and
then remove the volute casing.