Gree GMV-ND07PLS/A-T(U) - Page 190

GREE Multi Variable Air Conditioners Indoor Unit
184
Motor and fan
Step
Diagram
Operation Procedure
6. Remove motor.
●Use a screwdriver to unscrew the 4
screws of motor. Then remove the
motor.
7. Replace and
install the motor.
●Remove the motor from motor
support and then replace with a new
motor.
●Tighten the 4 screws of motor with
a screwdriver.
8. Install the fan.
●Direct the hole of fan to the motor
shaft and then mount on the fan.
●Tighten the clamping band of
motor with a wrench.
9. Install the water
tray.
●Direct the 4 corners of water tray to
the 4 corners of the unit and then
press them. Use a screwdriver to
tighten the screws in the 4 corners.
●Connect the power cord and water
pump wire.
●Place back the cover of electric
box and the clamp of power cord.
Then tighten the screws with a
screwdriver.