Gree GMV-ND07PLS/A-T(U) - Page 62

GREE Multi Variable Air Conditioners Indoor Unit
56
6) When connecting to terminals, the wire-stripping length for the conducting wire of twisted
pair line should be no more than 6mm and the cores of conduction wire can’t be exposed
to terminal to preventing short-circuit or electric leakage.
7) After finishing the wiring, buckle the outer shell and the panel together.
2.2.3 Removal Method
(1) Wired Controller XK46 Disassembly diagram:
1 2 3 4
Fig. 2.2.5 Disassembly diagram of wired controller XK46
(2) Wired Controller XK79 Disassembly diagram:
1 2
3
4
Fig. 2.2.6 Disassembly diagram of wired controller XK79
2.2.4 Connection of Communication Cord
There are 4 ways to connect wired controller with indoor units’ network:
Fig. 2.2.7 One wired controller Fig. 2.2.8 Two wired controllers
control one indoor unit controls one indoor unit