Gree GMV-ND07PLS/A-T(U) - Page 91

GREE Multi Variable Air Conditioners Indoor Unit
85
Setting
Code
Setting Content
Setting Value
P20
Indoor environment temperature
value
01: temperature sensor of air return vent
02: temperature sensor of wired controller
03: temperature sensor of air return vent for cooling, dehumidifying,
and air supply; temperature sensor of wired controller for heating
04: temperature sensor of wired controller for cooling, dehumidifying,
and air supply; temperature sensor of air return vent for heating and
automatic mode
P21
Corrected value settings of
environment temperature sensor of
IDU (for cooling, dehumidifying,
and air supply)
-15 to 15
P22
Corrected value settings of
environment temperature sensor of
IDU (for heating)
-15 to 15
P30
Static pressure settings for indoor
fan
Type 1: 03.04.05.06.07
Type 2: 01.02.03.04.05.06.07.08.09
P31
High-ceiling installation settings
00: standard-ceiling installation height
01: high-ceiling installation height
P32
Capacity adjustment function of
IDU
-40% to +40%
P34
Repeating validity for time-point
timing
00: invalid
01: valid
P35
Factory setting recovery for user
functions
00: invalid
01: factory setting recovery
P36
Factory setting recovery for
engineering settings
00: invalid
01: factory setting recovery
P40
Prevention for heat collection
00: disabled
10: 10 seconds
20: 20 seconds
30: 30 seconds
40: 40 seconds
50: 50 seconds
60: 60 seconds
P42
Project number settings of IDU
1-255
P43
Preferential operation settings
00: no preferential operation
01: preferential operation
P44
One-key project number setting
query for IDU
00: not displayed
01: displayed
P45
One-key project number reset for
IDU
00: invalid
01: project number reset
P46
Accumulated time clearing for air
filter cleaning
00: not cleared
01: cleared