Multi VRF Floor Standing Indoor Unit
17
6 Control and Display
6.1 Control Panel
NOTES!
“AIR” function is an optional function of indoor unit, for the unit without such
function, this function is invalid; “E-HEATER”, “ROOM”, “OFFICE”,
“RESTAURANT”, “COMMON” are reserved functions of indoor unit that cannot be
set.
6.2 Operational Instruction
6.2.1 Start Up and Close Down the Unit
Press “ON/OFF” button to start up the unit. Press “ON/OFF” button to close
down the unit.
6.2.2 Mode Setting
Under power-on status, each time press “Mode” button, the mode will be
switched according to the following order circularly:
NOTES!
①
Only the master indoor unit can set auto mode.
②
Under auto mode, if the indoor unit is in auto cooling, the “
” and “ ”
icons are on; if the indoor unit is in auto heating, the “
” and “ ” icons
are on.
To Next Page
Loading...
