Multi VRF Floor Standing Indoor Unit
19
the left and right swing function. If “
” icon is on it means the function has been
started up; if “ ” icon is off it means the function has been canceled.
(3) Settings of X-fan.
X-fan function: after closing down the unit under cooling and dry mode, the
air conditioner will automatically dry the water of evaporator of indoor unit to
prevent breeding of bacteria and mildew.
Turn on or cancel X-fan function: with the unit is started up, under cooling or
dry mode, press “Function” button to switch to X-fan function, when “
” flickers,
press “▲” or “▼” buttons to start or cancel X-fan function. If “ ” icon is on it
means the X-fan function has been started up, if “ ” icon is off it means the X-fan
function has been canceled.
(4) Settings of Timer Function.
1) Timer Function: under power-on status, the count down of
power-off time can be set. Under power-off status, the count down
of power-on time can be set.
2) Timer setting: press “function” button to switch to timer function,
when “
” icon flichers, press “▲” or “▼” button to adjust the
setting time. After setting the time, press “ON/OFF” button or
without pressing any buttons for consecutive 5 seconds, the
setting time is confirmed and quit the function setting status. After
quitting the function setting status, the “
” icon is on, it means the
timer function has been turned on.
3) Cancel timer: press “Function” button to switch to timer function,
when “
” icon flickers, press “▲” or “▼” button to set the time to
be “00”, then the timer function is canceled; press “ON/OFF”
button or without pressing any buttons for consecutive 5 seconds,
it will quit the function setting status. After quitting the function
setting status, the “
” icon is off, it means the timer function has
been canceled.
4) Count down setting range: 00~24 hours, in which “00” refers to
To Next Page
Loading...
Need help?
General
