EasyManua.ls Logo

Gree GMV-PD140W/NAB-K

Gree GMV-PD140W/NAB-K
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction of the GMV D.C. Inverter
24
Aftersales Service
In case the air-conditioning unit has any quality problem or you have any inquiry, please contact the local
aftersales service agency designated by Gree
11 Unit Performance Parameters
11.1 Rated working condition
Indoor side state Outdoor side state
Dry bulb temp. Wet bulb temp. Dry bulb temp. Wet bulb temp.
Rated cooling 27 19 35 24
Rated heating 20 15 7 6
Note:
.
The following listed cooling /heating capacity and noise is tested before outgoing;
.
The parameters below are tested under rated working condition. If there is any change to them, please
refer to the nameplate;
.
The parameters of heating capacity of indoor unit for heat pump excluded that of auxiliary electric
heating power.
.
The performance parameters below are tested according to standard GB/T18837—2002
11.2 The range of production working temperature
Cooling working range Outdoor temperature10 ~48
Heating working range Outdoor temperature -20 ~27

Other manuals for Gree GMV-PD140W/NAB-K

Related product manuals