DC Inverter Multi
VRF Service Manual
151
Search and Setting Methods of Address of Z6035F Wired Controller
When the unit is turned off, press buttons “Fan” and “ON/OFF” simultaneously, and the address no. of the display
panel will be shown on where setting temperature is shown on display panel. Address code of indoor unit will be shown
on where the ambient temperature is shown on display panel and address code of patch board which connects main indoor
unit will be displayed on where the setting temperature is shown on display panel.
MODE
FAN
SWING
TIMER
ON/OFF
Search and Setting Methods of Address of ZX6045 Wired Controller
Search of address of wired controller: When the unit is turned off, press buttons “Function” and “Mode”
simultaneously and the address no. of this wired controller will be displayed on display panel.
Setting of Address of Wired Controller: When the unit is turned off, press buttons “Function”and
“Mode”simultaneously for 5s, and the address no. will be displayed and blink on display panel. Press “▲”and”“▼” to
adjust the address code( between 1-16). Then press button“Conrm/Cancel”to conrm it.
Search and setting of address of wired controller are as follows:
To Next Page
Loading...