60
DC Inverter Multi
VRF Service Manual
CONTROL
6.2.4 Installation
After selection of installation location, perform the installation as follow:
1) Conrm installation hole site:
To be installed in the wall
(1) Dirll a hole of of 180mm×106mm×72mm (L×W×D)
180
110
72
Wall
Fig.6.2.4.1
(2) Make 4 pieces of wooden or plastic chucks
21
138
19
64
Wall
Wooden chucks or plastic chucks
Fig.6.2.4.2
To be installed in the control cabinet:
Make 4 holes inside the wall of control cabinet according to the following dimension in the gure.
138
4-￠3.3
64
Fig.6.2.4.3
To Next Page
Loading...