Status of other thermal source
Status of the 2-way valve
Status of the 4-way valve
Status of the flow switch
3.2.5.2 Parameter Viewing
[Operation Instructions]
★
1. At the ―
VIEW
‖ page, by touching ―
Parameter
‖, it is able to view each parameter of the unit, as
shown in the figure below.
Parameter View Page
Viewable Parameters
Environmental temperature
Entering water temperature of the plate type heat exchanger
Leaving water temperature of the plate type heat exchanger
Leaving water temperature of the auxiliary heater
Floor debug target temperature
Economizer inlet temperature
Economizer outlet temperature
Weather-dependent target temperature
3.2.5.3 Error Viewing
[Operation Instructions]
★
At the ―
VIEW
‖ page, by touching ―
Error
‖, it is able to view errors of the unit, as shown in the figure