Operation display
Timer display
● It indicates the air conditioner is
put through the power. Under on
Heating display
ƽ
When this indicator is on, it
indicates the timer function
is turned on.
status, this indicator is on; under
off status, this indicator is off.
●When this indicator is on, it
indicates the heating mode is
turned on.
●When this indicator is on, it
indicates the defrosting function
is turned on.
ƽ
●
●
When this indicator is on, it indicates
the dry mode is turned on.
When this indicator is on, it indicates
the cooling mode is turned on.
When this indicator is on, it indicates
the E-heater function is turned on.
●When this indicator is on, it indicates
the fan mode is turned on.
● Displays the fan speed. The fan speed
is displayed as below:
Dry display
E-Heater display
Cooling display
Fan display
Icon function introduction
Fan speed display
Defrosting display
(low) → (medium) →
(high) → (turbo)
button
6
●
Left and right swing: this button controls the left and right swing motor, single pressit to switchover between ON and OFF.
●
Up and down swing: this button controls the up and down swing motor, single pressit to switchover between ON and OFF.
▼/▲ button
5
●
After each pressing of "▲" or "▼" button, set temperature will increase or decrease
auto mode. Timer setting can be set in 1h increment among 0~24h. When it is adjusted to
auxiliary heating function setting through Function button,press this button to turn on or turn off auxiliary heating. (Note: auxiliary
heating is valid only for the model with this function.)
1ć
. Temperature adjustment range is
ć
~30
ć
. This button is invalid under
●
Hold "▲" and "▼" buttons for 3s and the air conditioner will display "LC", which indicates buttons are locked. Any button
under on status or ON/OFF button and function buttons under off status are all invalid. Hold these two button for 3s
again to release the lock.
/
16
To Next Page
Loading...
