28
Technical Information
Service Manual
6. Function and Control
Fig.1
①
②
④
NOTICE:
● During operation, point the remote control signal sender at the
receiving window on indoor unit.
● The distance between signal sender and receiving window
should be no more than 8m, and there should be no obstacles
between them.
● Signal may be interfered easily in the room where there is
uorescent lamp or wireless telephone; remote controller should
be close to indoor unit during operation.
● Replace new batteries of the same model when replacement is
required.
● When you don’t use remote controller for a long time, please
take out the batteries.
● If the display on remote controller is fuzzy or there’s no display,
please replace batteries.
To Next Page
Loading...
