Gree GVC24AMXF-K3NTC7A - Remote Controller Operation

25
Technical Information
Service Manual
6.2 Remote Controller Introduction of YAP1F11(WiFi)
6. Function and Control
Buttons on remote controller
Introduction for icons on display screen
Introduction for buttons on remote controller
NOTE:
● This is a general use remote controller, it could be used for
the air conditioners with multifunction; For some function, which
the model doesn't have, if press the corresponding button on
the remote controller that the unit will keep the original running
status.
● After putting through the power, the air conditioner will give
out a sound. Operation indicator " " is ON . After that, you can
operate the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller,
the signal icon " " on the display of remote controller will blink
once and the air conditioner will give out a “di” sound, which
means the signal has been sent to the air conditioner.
1. ON/OFF button
Press this button can turn on or turn off the air conditioner. After
turning on the air conditioner, indoor unit will give out a sound.
2. MODE button
Press this button to select your required operation mode.
P
fan speed. It’s displayed
WiFi
{
function
Left & right swing
Up & down swing
Sleep mode
{
Send signal
battery power
This is a general remote controller.Some
models have this function while some
do not. Please refer to the actual models.
Set fan speed
(No
,
only after turning it on.)
Operation mode
Auto mode
Cool mode
Dry mode
Fan mode
Set time
TIMER ON/TIMER OFF
Turbo fan speed
Quiet mode
Heat mode
X-FAN function
Child lock
Switch temperature displaying type on
the unit’s display
6
1
7
8
2
9
4
3
10
5
6
7
12
9
8
13
13
10
14
11
12
15
COOL button
HEAT button
button
button
SLEEP button
X-FAN button
11
WiFi button
1 ON/OFF button
2 MODE button
3 FAN button
4 SAVE button
5
button
14
LIGHT button
15
TIMER button
P