Gree GWH12ACC-K6DNA1F/I - Removal Procedure; Removal Procedure of Indoor Unit

99
Installation and Maintenance
Step Procedure
Before disassemble
Turn off the air conditioner and disconnect the
power before disassemble the air conditioner.
1. Remove lter
Open the front panel; Push the lter upwards to loosen
the clasp and then pull the left filter and right filter
outwards to remove them.
2.Remove front panel
Separate the panel rotation shaft from the groove xing
the front panel and then removes the front panel.
Note:
The display of some models is fixed on the panel;
unscrew the screws fixing the display on the panel
before removing the panel.
11. Removal Procedure
11.1 Removal Procedure of Indoor Unit
Caution: discharge the refrigerant
completely before removal.
Filter
Handle
Panel
Panel rotation