59
Installation and Maintenance
Service Manual
Step Procedure
3.Remove display and panel
4.Remove electric box cover 2
5.Remove front case sub-assy
6. Remove vertical louver
Panel rotation
Screws
Display
Panel
Groove
Screws that are locking the display board.
Separate the display board from the front
panel.
Open the front panel; separate the panel
front panel and then removes the front
panel.
Remove the screws on the electric box
cover to remove the electric box cover 2.
Loosen the clasps of front case Life the
front case sub-assy upwards to remove
it.
Loosen the connection clasps between
vertical louver and bottom case to
remove vertical louver.
a.
b.
Screw
Screws
Electric box cover 2
Clasps
Front case sub-assy
Clasps
Vertical louver
To Next Page
Loading...
